![]() Now, let’s talk about 3 ways of installation in detail. ![]() Set up FARM_HASH to connect to Hive or API, if necessary. If the password for the web interface was changed, the same would be for SSH. Go to config.ini and check login and password for the ASIC’s SSH or web interface. In case you don’t have a lot of devices, you can make this list manually. From csv, copy the IP list and insert it in ips.ini. Scan the network using BTC_TOOLS and export the list to csv. Download and unzip the following archive. Preparation Stage (required for all the options):ġ. Please note, that all the manual steps which involve using BTC_TOOLS can be done via ASIC’s web interface (BTC_TOOLS is usually used for a large number of devices). We will cover all the options, so you will be able to install Hiveon ASIC firmware quickly and easily. If for some reason you want to go back to the OpenPilot firmware, go to this page and follow the exact instructions “How to Upgrade the Bootloader and Erase Settings”.There are three ways to install Hiveon ASIC firmware for T17, T17+ and T17E - everything depends on the stock firmware release date. Then you can connect it to the Cleanflight Configurator. Important: To use the board through the UBS-Port, you need to power it with external battery. That’s it, now you have the Cleanflight firmware on your CC3D board. Check the “I know what I’m doing!” box and then “Flash” button. Now you can open the downloaded cleanflight_CC3D.bin. Open the OpenPilot GCS software, connect the CC3D board through the USB-Port, go to the “Firmware”-Tab and click the “Halt” button. ![]() Download the “ cleanflight_CC3D.bin” from GitHub. Install the Cleanflight Configurator from the Chrome Web Store and download the latest Cleanflight firmware for the CC3D board. Download it from the official ST-webpage and install it. ![]() We also need the STM32 Virtual Com Port driver. Here is a manual how to install it, if you have some problems with that. I have tried it yesterday and will show you, how to do this if you don’t want to watch the video.įirst download the OpenPilot GCS 15.02.02 (the newest 15.05 does not support the CC3D board) and install it on your computer. I used my Arduino Nano as FTDI adapter to do this, but Bill posted a video in the comments, how the board can be flashed only through the USB-Port. In one of my previous post, I described how to flash the Cleanflight firmware on the CC3D flight controller and why I prefer the CC3D over Naze32 at the moment. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |